Dual Fuel Range Cooker With 13amp Plug
Are you a cook at home who enjoys the fast heating control of gas cooktops but wants an electric oven to bake? Find a dual fuel cooker that gives you the best of both worlds.
Many home chefs with experience prefer gas cooktops due to their superior temperature control and capacity to use advanced cooking techniques like grilling. These cooktops can be expensive, particularly if you require an additional gas hook-up as well as an electrician to install it.
What is a 13amp outlet?
If you own dual fuel range cooker (also called an electric and gas oven), then you'll need an appropriate 13 amp plug. The plug also needs to be wired in the cooker circuit using a competent electrician.
This ensures the current flowing through the plug will not exceed the limit of safety, which could lead to an electrical fire. The plug has an electrical fuse that regulates the current. The fuse goes out whenever the current passes through it over its capacity, which protects the appliance from over-charge of electricity.
The fuse is rated at 13 amps as indicated on the top of the plug and this is the maximum amount of current that the plug is able to pass without causing harm to the appliance or overheating the socket. When replacing fuses, it's important to select the same amperage rating that was used in the original. If you replace the fuse with one of a different rating, then you are at risk of overheating the socket and putting you and others at serious risk.
Ceramic 13 amp fuses are very durable and can withstand high temperatures generated by the range cooker. Ceramic elements are also fire-resistant and is therefore a better option over other kinds.
There are many ways to install the 13 amp plug. It may be wired to an existing live socket. the flex then connected to it using an screw or a plastic jaw type cord clamp. The clamp must be tightened after the plug is firmly pushed into place.
Some plugs may include a wiring diagram on cardboard over the pins. These must be removed prior to connecting the wires. The wires must be trimmed to the correct length, as if they are too long, they could be crushed when plug covers are changed. The earth wire must be the longest in order to connect it before the neutral and line pins.
How do I connect an outlet with 13amps?
The majority of dual cookers that use fuel in the UK are powered by an amp rating of 13 amps. This is important since ovens draw substantial current, while standard plug sockets only have a rating of 10 amps.
Generally speaking new appliances should be equipped with plugs at the time of purchase and it is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances may not have an outlet and that is where the problem arises.
When connecting a cooker to an existing plug socket the first step is to make sure that the rating of the fuse inside the fuse box is in line with the plug's rating. This is vital because a fuse that is not properly sized could be dangerous.
It is also recommended to ensure that the fuse is fully seated into the cartridge, and that there isn't any excessive movement. Next up is to prepare the flex to be used. Remove the sheathing to reveal the three conductors insulated. Utilize a utility knife to cut the sheathing beyond the grip on the cord at the point of entry into the plug. This won't penetrate the insulated conductors. The nick should be large enough to allow the sheathing to split and then expand as it is pulled back, revealing the cable underneath. Cut off the excess sheathing, leaving around 40mm beyond the flex.
The flex is positioned over the plug and the earth terminal is placed at the top and live and neutral terminals at the bottom. The sheathing around each pin is removed using the colored conductors as a reference. The internal cable is then secured into the terminal with the help of the cord grip. If the plug has a clamp for cords that is screw-type, let it loosen and then pull the insulation back to expose the copper wires. Connect each conductor that is insulated to the proper terminal (starting with the earth, then neutral and finally the live) using the channel they are running through in the plug.
What is the maximum draw of a 13 amp plug?
The maximum current draw for a 13amp plug at 300 volts is 3kw. This is a lot of power, but the standard fuse that comes with the UK plugtop won't fail until the cable is at a risky temperature. It is crucial to be aware of the power you're using in your kitchen, since a defective plug or socket can lead to an explosion.
The ceramic fuses that are used in plugtops are approximately 25mm and are suitable for 240V mains. They'll have an BS kitemark or similar marking on the side, and they contain sand. There are also cheaper glass or plastic alternatives, but they shouldn't be used with a live plug, except if you don't want to blow the fuse and potentially be electrocuted!
The majority of dual fuel range cookers in the UK require hard-wired and will not plug directly into the wall socket. They are typically connected through a dedicated cooker circuit, which is suitable only for appliances that can handle up to 20 amps.
Check the ring circuit of your home using the fuse box, or contact an electrician nearby. Ask them if the sockets are on the same ring, or if they are separate. They should also be able tell you if there's a dedicated circuit to power your oven.
The size of your kitchen is an important factor when you are looking to purchase a dual fuel range cooker. We have a great choice of cookers to fit any space, from compact 50-60 cm dual fuel models as well as huge 90cm + double oven options from the top brands such as Rangemaster and StovesAreUs.
We also have a wide range of multifunction electric and gas cookers. These multi-functional appliances allow you to cook a variety of meals, such as pasta, casseroles and curries.
Currys offers a broad selection of Cookers. Explore our online selection or stop by our store to see the range. We offer free delivery and home installation on selected range cookers as well as flexible payment options. Our staff is ready to answer any questions you may have. You can contact us by email or telephone. Credit is subject to status and terms & conditions apply.
What is the maximum current draw of the cooker switch?
There is lots of confusion regarding what the maximum current draw of a cooker switch is. Most cookers are hard-wired and connected to a dedicated oven-ring circuit and not an ordinary socket. This is due to the fact that they usually consume more than 20 amps when the electric hob and gas oven are in use.
So, you won't find a dual range cooker with a fuel source that can be fitted to a standard socket, as this could create a serious fire risk and would be against electrical safety regulations. A licensed electrician must always install new electrical circuits in the kitchen, connecting them to the cooker. They should also ensure that the load of the oven and hob do not exceed the circuit's capacity.
Dual fuel range cookers blend the flexibility of a gas stove and the precision and precision of an electric oven. ebay range cookers dual fuel are therefore a favorite among chefs as well as home cooks. If you want to try various cooking techniques like searing and charring, a dual fuel range cooker is the ideal choice.
When buying a new range cooker, you will need to consider a number of factors like size, performance and cost. Additionally, you'll also need to make sure that your house has an appropriate gas hook-up to the appliance. If you are unsure, it is best to make an appointment with a Gas Safe engineer to inspect your property before installation.
Currys dual fuel range cookers come in a variety of models to meet all budgets. From affordable models from Indesit and Zanussi to our own Essentials collection. If you are looking for something more sophisticated we have a selection of premium JennAir models, that come with many new features.
It is crucial to read the user's manual before purchasing a dual fuel range cooker. It will provide you with specific details regarding the gas and electrical requirements. You will need a gas connection in your home. A plumber might be required to connect it for you. You may also need a cooker-ring circuit that is installed by a qualified electrical engineer.